Rebuildables - Wick and Wire

Clapton coils are one of the most difficult coils to wrap.  Making a clapton coil requires tightly wrapping a thin strand of Kanthal wire around a larger diameter of wire. They take a lot of patience and create a lot of frustration...

Frame Staple Claptons are coils created by sandwiching 4 layers of 0.1 x 0.3 ribbon wire with two 28 gauge wires on each side wrapped with a 36 gauge wire providing massive surface area for vapor production.  Combines the advantage both...

Staggered Fused Claptons are coils created with two round core wires wrapped in a spaced Clapton then joined together by the spacing with an outer Clapton wrap.  Consisting of two 26 gauge Kanthal wires staggered and fused with a 36 gauge wire...

Coilology's Stainless Steel 7 in 1 Coil pack consists of six packs of 7 different styles of coils, for a total of 42 coils.  Save time and frustration by not hand braiding or twisting your own coils.  These coils are ready to go!  Perfect...

Presenting Thread Cotton by Coilology, pre-cut strips of cotton with an aglet on one end.  Easily 'thread' one of the cotton strips through a coil using the aglet end.  Includes 20 strips of cotton measuring 50mm (approx 2 inches) long. ...

Ekowool provides superior wicking of E-Liquid.  Durable and resistant to temperatures exceeding 1000°C (2012°F).  Made from 95 - 98% pure braided silica with an organic cotton core provides the ultimate wicking capabilities...

Ekowool provides superior wicking of E-Liquid.  Durable and resistant to temperatures exceeding 1000°C (2012°F).  Made from 95 - 98% pure braided silica provides the ultimate wicking capabilities.   Sizes are the inner...

Vapowire is the industry's leading supplier of resistance wire for the rebuildable electronic cigarette market. Vapowire's Kanthal A1 wire comes in a variety of sizes, lengths, and styles. 100% Made in the USA.    The spools are 100% machine...

The Vapowire Nichrome 80 is a machine wound resistance wire known as the builder's choice for vapers looking for a lower resistance per foot.  The machine winding minimizes the presence of contaminants commonly found with manual handling and...

Pure high grade Ni200 (Nickel) wire for temperature control builds!  Manufactured by one of the industry's leading supplier of resistance wire, and available in multiple gauges, this is some of the best quality wire around.  100% Made in the...

Each spool contains 30 feet of KA1 resistance wire. Note: 22 gauge spools contain 15 feet of KA1 resistance wire due to their thickness.  These Products are for Advanced Users Only  Note:  ALWAYS test new coils on an ohm...

Each spool contains 30 feet of Ni200 Pure Nickel Wire.    NOTE: This product will only work with temperature control (TC) devices such as:  

Clapton coils are one of the most difficult coils to wrap.  Making a clapton coil requires tightly wrapping a thin strand of Kanthal wire around a larger diameter of wire.  They take a lot of patience and create a lot of frustration...

Wick Installation Instructions:  Slide coil assembly out from the bottom.  Twist thumb screws to loosen previous coils, uncoil the wires from the post, remove coil and dispose.  To install the new coil, insert the end of the wires into...