Personal Vaporizer E-Cig - Kanger - eVod Starter Kit
The Kanger EVOD Starter kit comes with everything you need start vaping. Also makes a great gift for friends and family.
Kanger EVOD Starter kit includes the following:
• 2 x 650mah Kanger Batteries with 510 and EGO threading
• 2 x Kanger EVOD Clearomizers
• 5 x Kanger 1.8ohm replacement heads
• 1 x USB Charging cable
• 1 x USB Wall adapter
• 1 x User Manual
Color Selection: NOT ALL COLORS may be available. See Color Selection (above in the ordering section) for available colors. The kits come with various resistance replacement heads from Kanger
Stainless: 1.8 ohm replacement coils
Purple: 1.8 ohm replacement coils
Magenta: 1.8 ohm replacement coils
Blue: 2.2 ohm replacement coils
Pink: 2.2 ohm replacement coils
Green: 2.4 ohm replacement coils
Kanger eVod Clearomizer with approx 1.8ml eliquid capacity and replaceable bottom coil atomizer head.
The eVod has an approx 1.8ml liquid capacity with replaceable bottom coil atomizer heads. The Bottom Coil design allows for superior wicking and maximizes flavor. Compatible with eGo threaded batteries and most other eGo threaded electronic cigarettes.
The metal tank sleeve is windowed to view the eliquid level.
The replaceable coil screws into the bottom cap of the eVod clearomizer. Simply unscrew the bottom cap and replace with a new head without the need to empty your remaining liquid from the tank.
To fill the evod, turn the clearomizer upside down, and remove the bottom thread assembly. Tilt the EVOD at a slight angle, fill with 2.4ml of your favorite ECBlend e-liquid. Do not allow liquid to flow in to the cnter air hole tube. Replace the bottom thread assembly, wait 2-3 minutes and it is now ready to be used.
Be sure to check and tighten the Bottom coil, after filling with liquid. This will ensure that no leaking will occur.
A CLEAROMIZER is a hybrid type of tank. It uses a wicking system to bring the e-liquid up to the heating coil. (These type of hybrid tanks work better with higher PG base mixes (i.e. 70/30, 80/20) Thicker base mixes wick slower and you may occasionally get a 'burnt flavor' due to this. Tip the tank towards the side with the wicks to help saturate them.)
How much E-Liquid is still in the clearomizer is easily seen. This is very important in knowing how much e-liquid is left in the tank and helps avoid burnt taste that comes from letting your cartomizer go dry.
Easy to clean, and Clearomizers are generally larger than a regular cartomizer.
Capacity: Each unit holds approx 1.8mL of e-liquid.
About Resistances: Higher 3.0 and Up ohms resistance provides a cooler, smoother vape with less throat hit.
Low to Standard Resistance measures 1.25 - 2.7 ohms. Lower resistance tank cartomizers provide greater heat and vapor which results in greater throat hit. Low Resistance Cartomizers are NOT recommended for thin, pen-style devices. They will work but can damage the battery and lower the expected life of the battery.
Authentic Kanger Products, directly from Kanger Technology
Simplify filling with Blunt Tip Needle Caps
For best results, make sure the wick is fully saturated. Let it sit for 5-10 minutes to allow for saturation.
AVOID HARSH BURNT TASTE: Incorrect filling, not filling completely, excessive voltage, or letting it go 'dry' (not re-filling) may result in a harsh burnt taste.
On Clearomizers: If you get a BURNT taste, tilt the clearomizer so that the liquid makes full contact with the wick. This is usually a sign you need to add more e-liquid to the tank.
|Due to personal tastes and preferences we are unable to offer returns, refunds or exchanges for e-liquid products. We highly recommend purchasing a 5ml sample bottle of eLiquid to find out if it is good for your personal tastes.|
All e liquid images on this website are for flavor reference only. Flavors are e liquid.