Kanger MT3S Clearomizer (empty) - Made from Polycarbonate plastic. (See Polycarbonate note below)
Fits any eGo 510 threaded battery. Fill with your favorite ECBlend e-Liquid.
The Kanger MT3S is a bottom coil clearomizer. The wick and coil are always saturated with E-Liquid.
A CLEAROMIZER is a hybrid type of tank. It uses a wicking system to bring the e-liquid up to the heating coil. (These type of hybrid tanks work better with higher PG base mixes (i.e. 70/30, 80/20) Thicker base mixes wick slower and you may occasionally get a 'burnt flavor' due to this. Tip the tank towards the side with the wicks to help saturate them.)
How much E-Liquid is still in the clearomizer is easily seen. This is very important in knowing how much e-liquid is left in the tank and helps avoid burnt taste that comes from letting your cartomizer go dry.
Easy to clean, and Clearomizers are generally larger than a regular cartomizer.
Capacity: Each unit holds approx 2.8mL of e-liquid.
About Resistances: Higher 3.0 and Up ohms resistance provides a cooler, smoother vape with less throat hit.
Low to Standard Resistance measures 1.25 - 2.7 ohms. Lower resistance tank cartomizers provide greater heat and vapor which results in greater throat hit. Low Resistance Cartomizers are NOT recommended for thin, pen-style devices. They will work but can damage the battery and lower the expected life of the battery.
Authentic Kanger Products, directly from Kanger Technology
Simplify filling with Blunt Tip Needle Caps
For best results, make sure the wick is fully saturated. Let it sit for 5-10 minutes to allow for saturation.
AVOID HARSH BURNT TASTE: Incorrect filling, not filling completely, excessive voltage, or letting it go 'dry' (not re-filling) may result in a harsh burnt taste.
On Clearomizers: If you get a BURNT taste, tilt the clearomizer so that the liquid makes full contact with the wick. This is usually a sign you need to add more e-liquid to the tank.
Posted by Amy on 8th Nov 2013
This is absolutely my favorite product ever. This is one I can actually go all day without refilling.
Posted by Kevin on 19th Jul 2013
I've been using CE-series clearomizers for the last few months since switching from KR808s to eGo batteries, and went out on a limb to give this a try. Now I'm a bottom-coil convert for life.
First, there's no need to tilt the clearo to keep the wick saturated, since the atomizer is fed from the bottom. This has, so far, eliminated any burning flavors from the juice. Second, the flavor of my favorite juices are even more clear than they were in my CE5s, and I feel like I'm tasting them for the first time (the Dragon Series is especially delicious). Third, vapor production is at least as good as in the CE5, though my only gripe with the product is the placement of the intake holes on the threaded collar. They're too easy to cover up, particularly since one of them is positioned directly over the button on my eGo-C. So it's taken a bit of an adjustment period to get used to, though I wouldn't bother down-ranking just for that.
Also, just a note, while ECBlend only appears to offer a 1.8 ohm version, I inspected the coil head when I first received it and it is clearly stamped "2.2 Ω", so bear in mind that I have been testing at that resistance.
Posted by Kenny on 17th Jul 2013
Perfect for on-the-go. Great aesthetic appeal, easy to fill, coil heads easily unscrewed and replaced, perfect pull, and has solid threading. Using with a standard eGo 900mah battery for when I don't care to haul around my tank.
|Due to personal tastes and preferences we are unable to offer returns, refunds or exchanges for e-liquid products. We highly recommend purchasing a 5ml sample bottle of eLiquid to find out if it is good for your personal tastes.|
All e liquid images on this website are for flavor reference only. Flavors are e liquid.