Below are the available bulk discount rates for each individual item when you purchase a certain amount
SmokTech XXXL Dual Coil 510 Cartomizer (empty)
Resistances: Higher 3.0 ohms resistance provides a cooler, smoother vape with less throat hit.
Low Resistance measures 1.5 ohms. Lower resistance cartomizers/atomizers provide greater heat and vapor which results in greater throat hit. Low Resistance Cartomizers are NOT recommended for thin, pen-style devices. They will work but can damage the battery and lower the expected life of the battery.
Capacity: Each cartomizer holds approx 3mL of e-liquid.
Authentic SmokTech Cartomizers, directly from SmokTech
Simplify filling with Blunt Tip Needle Caps
Shaking and Steeping: ECBlend E-Liquids are made fresh at the time you order and shipped quickly. Steeping allows flavors to blend and marry fully over time, so you will have a richer, deeper, more flavorful product after a few days or weeks of steeping. (This is especially true of tobacco flavors, our Dragon Series, and larger bottle sizes.) Store in a dark cool place, out of reach of children and pets. Shake daily.
(Select Options with Care: Options are available to mix and match to suit your taste. Care should be taken to not over flavor, (i.e. adding double extra flavor plus extra menthol plus double sweetener plus flavor shots will alter the original recipe and may give it a metallic or medicinal taste.) Always order a 5ml bottle before ordering a larger size.)
DOUBLE Extra Flavor WARNING: Double extra flavor can change the intended flavor of a blend. CLICK HERE to read FULL WARNINGS
EXTRA MENTHOL WARNING: Extra Menthol is very minty, order it at your own risk.
TASTE IS SUBJECTIVE: We recommend trying a 5ml bottle before ordering a larger size.
CUSTOM E-LIQUID - NO RETURNS, REFUNDS or EXCHANGES: Due to personal tastes and preferences we are unable to offer returns, refunds or exchanges for e-liquid products.
WARNING ABOUT POLYCARBONATE TANKS: Use Polycarbonate tanks with e-liquid at your own risk. NOTE: If your tank becomes cloudy or begins to crack, discontinue use of the tank. This usually indicates the plastic is polycarbonate. MORE INFORMATION HERE and links to PP tanks
Posted by Tonya Mosher on 15th Aug 2013
It's not that this isn't a good product, it produces decent vapor (I use it with an ego and I get plenty of vapor), but it's just such a pain to fill! Takes way too long. I think you probably need a needle tip to fill quickly and I just don't have the patience for that. But if it's something you can deal with, not a bad way to go I suppose.
If you're not a clearomizer user, there are things you need to be aware of before you buy this product. First of all, the body is plastic, this means fragile. A lot of people here are complaining about the shell breaking. They do that. You've got to be careful. It's a trade off. They're much less sturdy than regular metal cartos, but you can see how much juice you've got left. I like that.
You also can't put cinnamon juice in them, at all. Cinnamon will eat anything with a plastic body. This is important to know! If you vape anything with cinnamon in it, stick to the metal cartos!
Posted by Tom B on 28th Jan 2013
I received 10 of these and they are ok but not great. The main problem is that they crack do to the heat and when they don't crack they just separate near the base of the cartomizer (where it screws onto the battery). This would cause fluid to run out everywhere.
Posted by Chris on 27th Dec 2012
I have only had these for a week and they are cracking in several places along the base. They seem to take 3-4 seconds to heat up before they produce vapor.. not going to waste my time in buying them again...
Posted by Unknown on 3rd Dec 2012
this cartomizer burned out my blue cig battery and i think it may have done damage to the life of one of my eGo-T 1100 mah batteries too when i tried to use it
ECBLEND: When using a dual coil cartomizer on a thing pen-style batter, you run the risk of lowering the life expectancy of the battery. Check out the article under Information on our website under Product Options Help > Help on Hardware > on the left side > OHMS, Cartomizers, Atomizers.
You want to make sure you want to select the proper resistances based on your battery.
Posted by Unknown on 27th Oct 2012
I got the 2ohm Cartomizer I'm using a ego battery and you have to hold the button for at least three seconds before starting to inhale to heat this up to make it produce any vapor this might work better on a higher voltage battery
Posted by JamieFB on 27th Jul 2012
This device isn't difficult to use or operate. Of course the saturation is key and overfilling a no no. A blunt tip needle would be your best choice in achieving this then let it sit for 10 minutes or maybe more if you want.
If you have issues with the tip slipping at any time, remove your mouth piece and use a q-tip dampened with alcohol or vodka. Run it around the top inside of your tank and the rubber mouth piece that sits inside the tank. Blow dry and reinsert. This can commonly be caused by e-liquid and/or condensation.
|Due to personal tastes and preferences we are unable to offer returns, refunds or exchanges for e-liquid products. We highly recommend purchasing a 5ml sample bottle of eLiquid to find out if it is good for your personal tastes.|
All e liquid images on this website are for flavor reference only. Flavors are e liquid.